AMS E Flash for Mitsubishi Vehicles
Available now from AMS is the AMS E-Flash for Mitsubishi vehicles!
At AMS, we have very extensive experience with almost every setup imaginable for the Evolution platform. Our AMS E-Flash includes that experience from our many years testing, tuning and optimizing. Once completed you will be grinning from ear to ear with your new found performance, drivability, and security of knowing that you have gotten tuned by one of the best forced induction performance shops in the world!
Mitsubishi’s currently covered are the Lancer Evolution 5-10, 2009+ Mitsubishi Ralliart, as well as 2G Eclipse and older EVO with an EVO 8 ECU conversion.
With the AMS E-Flash we can successfully tune any setup that you may have. We also offer patching services for those who are interested in using Tephra Mods, speed density or other modifications to the factory Mitsubishis code set.
A few examples of mapping that may be changed in the Mitsubishi E-Flash
- Mivec full remapping to help aid in more power as well as increased spool and drivability.
- Fuel remapping to optimize fuel consumption as well as optimize fuel under full power.
- Ignition timing re-map to optimize power while still keeping it free of detonation.
- Rev limiter and speed limiter changed.
- Idle adjusted.
- Boost control optimized/tuned
- 2000cc+ injector scaling
- Psi based or Load based boost
- Per gear boost control
- Alternate map boost switching
- No lift to shift
- Lean Spool disable
- Alternate maps for switching fuels, boost and timing tables
- Launch Maps for drag racing
- Check engine light flash on engine detonation
- Intercooler spray on detonation
- Boost limit raised or disabled
You also have the option to run our AMS boost control solenoid for the best results. Using the AMS boost control solenoid, optimizing fuel and timing we are able to give you the most power possible, while maintaining great safety, reliability as well as drivability. We also remap MIVEC on the Evolution 9 & 10’s as well as the Ralliart’s. This allows for more torque, greater spool up and better drivability.
When you order the AMS E-Flash the following information is required:
- Which market the car is from (USDM,EUDM,JDM ETC)
- Model and year (IE-2010 Evo X) (MR, GSR, Ralliart)
- Modification List
- What fuel is being used
- Cobb AP Serial Number if you already have a Cobb
*PLEASE SPECIFY THIS INFORMATION IN THE NOTES SECTION*
The user has the option to use the Cobb Accessport or a Tactrix cable and Ecuflash. If you want to use one or the other than please specify when ordering.
Product Notes
- Please allow 2-3 business days for initial E-Flash mapping" to all the e-flashes
|
Cart is empty
