|
AMS Nissan R35 GT-R Alpha Series Camshafts
The AMS Alpha Series Camshafts for the VR38 are simply the best all-around solution for anyone with an upgraded turbo. After extensive testing, AMS offers a cam design that gives you the best of both worlds; massive power gains spread across a wide power band while maintaining excellent street manners and improved turbo response over the competition.
The Biggest Power Band For Upgraded Turbos
When we set out to create the perfect cam profile for this specific application we focused on more than just peak horsepower numbers. We concentrated our attention on making the most useable power throughout the rev-range without sacrificing driveability that so often plagues cars with large turbos and camshafts. What we ended up with exceeded even our expectations; we found the perfect balance of lift and duration to bring you the best cam choice on the market! The AMS Alpha cams provide you with massive peak and low end power with great spool up characteristics. The perfect combo making your GT-R an unbeatable machine!
Unmatched Power Gains And Excellent Response
The AMS Alpha Camshafts are designed for any Nissan GT-R with upgraded turbos, be it bolt-on or full turbo kit. Power gains can be anywhere from 30-100 horsepower depending on turbo selection and boost levels. Whether you’re driving on the street or track, you can expect excellent response and power throughout the entire rev range! Available exclusively through AMS and its dealer network, the AMS Alpha Series Camshafts offer you optimized performance unmatched by anything on the market!
Record Breaking Results For Your GT-R
These are the same camshafts found in our own World Record holding, 1500 HP Alpha 12 GT-R:
- 8.9 @ 169 mph in the quarter mile
- 3.31 seconds 60-130 mph
Exclusive Benefits
- 30-100 HP gains depending on turbo selection and boost levels
- Extraordinary power and excellent street manners
- Unmatched turbo spool up and driveability
- Proven to perform in our World Record holding GT-R
- Manufactured by Kelford Cams exclusively for AMS
Product Notes
- Upgraded valve springs and retainers are required to run these camshafts.
- Valve Clearance, set cold at the cam: Intake 0.30mm, Exhaust 0.33mm
|
Cart is empty
