Typical Performance Gains Stage 1: +10.4% HP and +22.8% TQ (see modification requirements) Stage 2: +14.4% HP and +28% TQ (see modification requirements)

Click for more details

• NEW: Launch Control and Flat-Foot Shift enabled.
• NEW: Boost Select enabled on all Stage1 calibrations and Stage2+Intake calibrations.
• Incredible power gains are just a few clicks and a flash away.
• Sophisticated logic of the OEM ECU remains intact, providing refined response, excellent driveability and precise control.
• Hand-held flashing lets you control what is stored on the ECU, when-ever and where-ever you want.
• Installs in just minutes through the OBD-II connector. No tools or other actions are necessary. Simply flash and drive.
• Grows with your modifications by changing maps that match your mods.
• Select from Off-The-Shelf maps to match your modifications, create your own maps with AccessTUNER Race or take your Subaru to a Pro Tuner for professional dyno calibration.
• Uninstalls just as easily and returns ECU to stock configuration.
• Conveniently data log sensor values for up to 10 hours to perform in-depth analysis without the need for bulky laptops or other equipment
• Vibrant-color, user-configurable auxillary gauge. Live Data lets you view real-time data from any of the data channels that can be data logged.
• Performane tools record 0-60mph times and 1/4 mile ET and Trap Speed. See real world impact of modifications and tuning changes.
• Intuitive DTC code reading provides the trouble code and a brief description to help diagnose issues easily. Reset the ECU to clear codes at your convenience.
• 30 Day Satisfaction Guarantee.

Unlike other tuning options, the AccessPORT is truly unique in its capabilities that go far beyond typical “chipping” or “reflashing” solutions.  This is where the AccessPORT clearly stands out from the competition:

Simple Installation - Just about anyone with even the most basic of automotive knowledge can quickly and easily install an AccessPORT. No computers, wire cutting/splicing or tools of any kind are required.

Base Maps - COBB Tuning provides several preloaded maps for common power modifications. Each base map is dyno developed and rigorously tested in multiple COBB Tuning facilities across the country These tests cover the spectrum of altitude, temperature, humidity, octane and fuel quality variables to ensure proper calibration and performance wherever the car is driven.

Change Maps - Since all base maps and custom tune maps are stored in the AccessPORT, you can change maps any time you want.  Switch to a race gas map for that extra performance at the track. Go to the Fuel Economy map for those long boring drives.  Load the Valet map to keep revs below 3,200 when you drop your car off with the parking attendant. The Anti-Theft map does not allow the car to start, keeping it safe in suspect areas or during extended parking.

Performance - Turn on your own portable performance evaluation suite! Measure 0-60mph time, 60 foot and 1/4 mile ET’s and Trap Speed. Switch to Dynamometer simulation and calculate your vehicle’s horsepower and torque.

Live Data - Monitor OEM sensor data on-the-fly. Use the AccessPORT as an additional gauge to monitor a huge number of signals, like: RPM, Coolant Temp., Battery Voltage, Intake Air Temp., Ignition Timing, Mass Air Flow, Cam Advance & Retard, Boost and many more!

Datalogging - Onboard datalogging allows multiple channels of data to be recorded simultaneously for later review. This allows for analysis of current engine performance.  Datalogs can be sent to professional tuners to provide additional power gains remotely through email! **

ECU Settings - Quickly adjust ECU settings to give you more control of your car’s capabilities.  Enable Launch Control and set your desired launch RPM for the perfect hole shot. Turn on Flat-Foot shifting to keep boost up during gear changes. Adjust idle speed and ignition timing in real time.

Trouble Codes - The AccessPORT allows you to read engine codes to troubleshoot issues and potentially save you from an expensive trip to the dealership. Once the issue is resolved, clear the codes and turn off the check engine light.

Uninstall - In the event the car must be returned to the stock configuration, the AccessPORT can be completely removed and the ECU restored to its factory condition. Perfect for trips to the dealership.