Garrett GTX3076R GEN II Super Core

$2,157.27

In Stock

-

SKU GRT.851154-5001S Categories , , Brand:

California Residents: Prop 65 Warning

Additional information

Weight 30 lbs
Dimensions 12 × 12 × 12 in
Assembly Kit PN

851154-5001S, 856801-5025S, 856801-5026S, 856801-5027S, 856801-5037S, 856801-5038S, 856801-5039S, 856801-5040S, 856801-5041S, 856801-5042S, 856802-5004S, 856802-5005S, 856802-5006S

CARB And / Or EPA Compliance Testing Not Completed

While we believe this product is either CARB EO exemption applicable, or complies with the EPA's Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.

FREE SHIPPING on all orders over $199.99 in the lower 48. (Exclusions Apply)

With 23 years of documented research and development in the forced induction field, AMS Performance has proven itself as the powerhouse in the automotive aftermarket. Our award winning performance systems are what all others are measured by.

Honeywell Garrett, is excited to announce the release of our Gen II GTX Series turbochargers. The GTX3071R, GTX3076R, GTX3576R, as well as the GTX3582R are included in the release. The GTX Gen II line received a major compressor wheel aero update that gives it the ability to produce up to 20% more horsepower than the previous version. You can also get these turbochargers in a Reverse Rotation configuration!

  • GEN II AERODYNAMICS FEATURE INCREASED HORSEPOWER RANGE
  • 58mm TURBOCHARGER COMPRESSOR OPTION
  • NEW FULLY MACHINED SPEED SENSOR PORT
  • NEW REVERSE ROTATION OPTIONS AVAILABLE

 

GTX Gen II compressor wheels were designed using proprietary Honeywell computer simulation technology focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger. Each GTX Gen II turbocharger has the ability to create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle. The 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability through its reduction in shaft motion.

The Gen II GTX Series Turbochargers feature a fully-machined compressor inlet, fully-machined compressor outlet, and fully-machined ported shroud.

We also added a brand new compressor housing featuring a high-flowing design matched perfectly for the new compressor wheel upgrade. Gen II compressor housings are not interchangeable with Gen I compressor wheels; however, all Gen II turbochargers are outline interchangeable with the equivalent GT and GTX Gen I products making a turbo swap easy to perform using all existing piping.

The new compressor housings are equipped with a fully machined speed sensor port that accepts the Honeywell Garrett speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be removed using a 5mm allen key when ready to install a speed sensor kit.

All Gen II GTX series turbochargers are compatible with existing GT and GTX turbine housings kits. Gen II turbochargers are only offered through Honeywell Garrett authorized distribution centers.

Available in four sizes: the GTX3071R, GTX3076R, GTX3576R, and GTX3582R Reverse Rotation turbochargers are ideal for twin turbo, V engine applications and for fabricators that want perfect symmetry to be displayed in the engine compartment. The Reverse Rotation turbos can also be used in single turbo applications where packaging is an issue. The compressor wheel spins in a counter-clockwise rotation while the compressor outlet exits air to the left, making its components non-interchangeable with Gen 1 or Gen II standard rotation products.

Featuring the new GTX Series Gen II compressor wheel designed using proprietary Honeywell computer simulation technology. Reverse Rotation turbochargers should be paired with a Gen II Standard Rotation counterpart and are not recommended to be matched with a Gen I turbocharger because the higher horsepower rating could lead to engine or other mechanical failure.

Reverse Rotation turbochargers have specifically designed turbine housings ranging from 0.61, 0.83, and 1.01 A/R and are not compatible with standard rotation housings.

 

WARNING: Maximum allowable turbocharger speed is 145krpm. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. To protect the turbocharger from overspeed when operating, a speed sensor can be installed into the compressor housing to monitor shaft speed. Sensors sold separately. (click here for details)

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The horsepower numbers represented above are calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel horsepower.

 

Compressor Turbine
Supercore Reference Data Inducer Exducer Trim A/R Inducer Exducer Trim
GTX3076R  Standard Rotation 58mm 76mm 58 0.60 60mm 55mm 84
GTX3076R  Reverse Rotation 58mm 76mm 58 0.60 60mm 55mm 84
Notes: Assembly Kit PN SuperCore PN Turbine Kit PN A/R Inlet Outlet Wastegate Divided
Assembly Kit PN Includes Supercore and Turbine Kit 856801-5027S 851154-5001S 740902-0009 0.63 T3 V-Band Free Float N
856801-5026S 851154-5001S 740902-0008 0.82 T3 V-Band Free Float N
851154-5001S 740902-0007 1.06 T3 V-Band Free Float N
856801-5039S 851154-5001S 740902-0036 0.61 V-Band V-Band Free Float N
856801-5038S 851154-5001S 740902-0035 0.83 V-Band V-Band Free Float N
856801-5037S 851154-5001S 740902-0034 1.01 V-Band V-Band Free Float N
Wastegated Turbine Assembly does not include bolts, clamps, or actuator 851154-5001S 771300-0006 0.63 T3 5 bolt Wastegated N
851154-5001S 771300-0005 0.82 T3 5 bolt Wastegated N
851154-5001S 771300-0004 1.06 T3 5 bolt Wastegated N
Reverse Rotation Configuration Supercore PN Turbine Kit PN A/R Inlet Outlet Wastegate Divided
844621-5004S 740902-0053 0.61 V-Band V-Band Free Float N
844621-5004S 740902-0054 0.83 V-Band V-Band Free Float N
844621-5004S 740902-0055 1.01 V-Band V-Band Free Float N

 

Related Products

Search by product name, SKU or keyword