2008 Chevrolet Corvette

CUSTOMER VEHICLE

CHRIS WARGACKI

2008 Chevrolet Corvette – 8 Second 1/4 Mile – 3,415lbs with Driver

Engine:
  • HKE 416CID Short Block
  • 11.25:1 compression
  • Ai LS3 Heads (minor exhaust port work )
  • LS3 Intake Manifold (no porting )
  • Stock Throttle Body
  • 230/234 .602/.602 117LSA Cam by Pat G.
Exhaust
  • Kooks 1 7/8 Headers
  • Catless X-Pipe
  • DMH E- cutouts
  • Factory Catback
Fuel:
  • Z06 In-tank Pump
  • ECS Stage 1 Fuel System
  • Stock Fuel Rails
  • FIC1000 injectors
Blower:
  • ECS Novi 2200 (16 psi)
  • Cartek 8 Rib Flip Drive
Drivetrain:
  • RPM Level VII 4L65 Swap
  • FTI Triple Disk Lockup Converter (3600 stall)
  • AMS Transmission Cooler
  • RPM Quaife Rear-end 3.42 Gear
  • Driveshaft Shop Driveshaft
  • Stock Axles
Intake:
  • AMS Custom 4” Intake
  • Single Nozzle Methanol Injection
Engine Management/Electronics:
  • Stock ECU
  • 2.5 BAR SD
  • AMS Tuned by Chris Black
Suspension/Brakes:
  • QA1 Front and Rear Adjustable Shocks
  • Stock Brakes
  • LG Rear Spindles
Wheels/Tires:
  • RTS Wheels (15×10 Rear / 17×4 Front)
  • Mickey Thompson MT Pro Radials
Exterior:
  • Z06 Body Conversion

THE ULTIMATE IN PERFORMANCE

The goal of AMS is to provide the highest quality, best performing products available.
By utilizing research and development and rigorous testing programs AMS will never compromise the quality or performance of our products.

SHOP PARTS

NOT LEGAL FOR USE ON POLLUTION CONTROLLED MOTOR VEHICLES. THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE ON HIGHWAY OR STREET VEHICLES, OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES.

Learn More

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some AMS Performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website: http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. AMS Performance holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.

Check out with afirmFree
    Shipping

On all orders over $199.99 in the lower 48.*Freight items not included*