Same amount of air. Same temperature. Every cylinder 🎯
That’s the target behind the revised runner design on our Gen 2 B58 intake manifold. Ryan from our engineering team walks through that change and five more 🔧
1️⃣ One long logo plate in place of the two separate plates, fully welded around the perimeter 👀
2️⃣ Bleed ports on the water-side end tanks, so the water side is easy to bleed 💧
3️⃣ New separator plate O-ring spec and design for better separation between the intercooler core halves and better heat transfer ❄️
4️⃣ Two in one: improved port injector angle and runner for better fuel delivery to the cylinder ⛽️
5️⃣ Revised runner design on the hot and cold sides for better air distribution across the core and into each cylinder 🌬️
#25yearsofAMS #amsperformance #b58 #grsupra #supra