Store

AP Racing Front J-Hook Replacement Rotors (2012+ R35 GT-R) [NIS3920AJ]

$1,795.00

A higher quality rotor replacement that not only performs better then stock but also costs a lot less.

Available on Backorder / Shipping Delayed

*
SKU: NIS3920AJ Categories: ,

Description

The OEM rotors on the new GT-R are a 2-piece floating system. The iron portion of the disc is drilled from the factory, which has proven problematic for those driving their GT-R’s aggressively on the racetrack. Many have seen excessive cracking and premature wear. The drilled OE replacement rotors are also extremely expensive at $1200 per rotor for the front, and $878 per rotor for the rear!

Essex has worked with AP Racing to come up with an alternative that offers both superior performance and tremendous value. Essex is offering a direct replacement iron disc that will bolt onto the OE aluminum rotor hat.

Primary discs benefits:


  • Directional, curved internal vane design that flows substantially more air than the OEM pillar vane design = lower temps, less fade, less pad and rotor wear.
  • AP’s patented J-Hook groove pattern- Crack resistance is much greater than the OEM drilled design.  Currently used in professional motorsport venues such as NASCAR, the J-Hook groove pattern is designed to provide outstanding bite for the pads, while promoting even heating and cooling of the disc face. The results are minimal distortion, constant pad contact, and less pad deposition, vibration and judder.
  • Substantially less expensive than OEM components.


Please note:


  • These rotors for the 2012+ have additional fastening points for added strength. Therefore, AP Racing hats are also included since rotors will not match with the OEM hats.
  • Hats are already attached and torqued to manufacturer spec.
  • Attachment kits can be re-used if you already have the AP racing brake disks.
  • Fits 2012+ Nissan R35 GTR

Additional information

Weight 50 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

THE ULTIMATE IN PERFORMANCE

The goal of AMS is to provide the highest quality, best performing products available.
By utilizing research and development and rigorous testing programs AMS will never compromise the quality or performance of our products.

SHOP PARTS
Check out with afirmFree
    Shipping

On all orders over $199.99 in the lower 48.*Freight items not included*

NOT LEGAL FOR USE ON POLLUTION CONTROLLED MOTOR VEHICLES. THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE ON HIGHWAY OR STREET VEHICLES, OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES.

Learn More

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some AMS Performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website: http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. AMS Performance holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.