With the tracks closed in the Chicagoland area until late April, our annual trip down to the TX2K GT-R Nationals events in March offer us the first opportunity to test new vehicles that we’ve been working on throughout the winter months. This year, initial testing of the AMS Alpha Omega at the TX2K12 was a definitive success. This was the first time the Omega has ever made an appearance at the drag strip and much was accomplished and learned.

SATURDAY

On Saturday, the Alpha Omega began on a low boost setting around 24lbs. After that, boost was increased to around 35lbs max and our first clean pass was just short of the record ET by three thousandths of a second (8.79@169mph)! At the end of that pass, one of the intercooler pipes popped, shooting downward at the under tray. This, along with the deployment of the parachute (causing the GT-R to dip) was believed the cause of the lip ripping off the vehicle as seen in the video. Ivan Phipps, our mechanic and driver of the Alpha Omega worked quickly to replace the lip, under tray and bumper so that we could make another pass.

The last pass of the day was made just before the lanes closed. Ivan launched hard with a 1.47 60ft, and began losing traction badly a little farther out. Most people at the line thought he would abort with the lanes being so narrow, but he stayed in it and straightened out to break the ¼ mile record with an 8.63@172.15mph pass! Again, the lip tore away from the bumper and the cause was finally attributed to the high speed and larger intercooler interfering with the lip support brackets. Ivan already had a solution in mind, but without another front end, the crew would have to pack it up and head home.

With the car breaking loose on the last past, the AMS crew felt the Alpha Omega had more left to accomplish on Sunday so the crew worked hard to source a donor GT-R for some parts. That evening, our sales manager was able to source a front end from NAGTROC forum friend two hours away and then found that Hennessey had an extra bumper and lip in storage that they were also willing to offer.

SUNDAY

Ivan began early in the morning to repair the front end and reinforce the lip with a set of modified brackets. The preparation was intense yet efficient, and the Alpha Omega made its first pass of the day with an 8.62@173.81mph — breaking the record it had achieved the day prior off a slower 1.53 60 ft.

We attempted to run one more pass with the boost turned up past 35lbs, but the track offered very limited traction and Ivan aborted the final pass. Overall, the car ran strong all weekend long and was ready to take on the Texas Mile the following weekend. BE SURE TO SUBSCRIBE TO OUR YOUTUBE CHANNEL. The Texas Mile video is one you will not want to miss!

AMS would like to sincerely thank Tim Sanders, Hennessey Performance and “Wreckless” (nagtroc.org member). Without their help, generosity and support, this achievement would not have been possible.

Special thanks to Dodson, Exedy, Sheptrans and Driveshaft Shop for their support of the Alpha Omega project as well.

THE ULTIMATE IN PERFORMANCE

The goal of AMS is to provide the highest quality, best performing products available.
By utilizing research and development and rigorous testing programs AMS will never compromise the quality or performance of our products.

SHOP PARTS

NOT LEGAL FOR USE ON POLLUTION CONTROLLED MOTOR VEHICLES. THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE ON HIGHWAY OR STREET VEHICLES, OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES.

Learn More

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some AMS Performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website: http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. AMS Performance holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.

Check out with afirmFree
    Shipping

On all orders over $199.99 in the lower 48.*Freight items not included*