Over the past 12 months we at AMS have been working on a really wild project, we call it the F1-I. With production getting close it’s time to make the big announcement.

Many of your are familiar with our current VSR intake manifold. For the past three years it’s been one of if not the best all around intake manifold available for the EVO VIII/IX. Well About 12 months ago we decided to make a change. AMS has been developing a new VSR intake manifold, The AMS F1-I. The plan was simple, to take our already power potent VSR and make it even better!

The F1-I was designed and prototyped in house by our team of engineers. From an Idea sprung a design, then a prototype and then testing. We were able to test the Plastic/fiberglass prototype about 6 months back on Martins personal EVO VIII against our current VSR. Even at only 15 pounds of boost it was able to make an additional 5% or 15-17whp horsepower across the board! Gains were seen throughout the ENTIRE POWER BAND! Due to the remarkable results we decided to go ahead with production.

The New AMS F1-I is now coming cast for added strength and to optimize the output of the manifold. Larger Bell horns, larger plenum, and an entry angle in the cylinder head equal to the intake ports on the head are now all possible. The casting process is not a fast one and the biggest reason why up until now we did not want to release any information.

As you can see from the CAD drawings , we implemented all of our resources here at AMS to bring you the best intake manifold made for the EVO VIII/IX. We referenced many modern design examples and engineering studies ranging from Moto GP to exotic race cars.

These units are due to arrive from casting in 8-10 weeks. We have a sample unit coming the next few weeks for testing against the top running manifolds now. We are very confident that the new AMS F1-I will post nothing less than amazing results.

Some more pics including those of the Prototype plastic/fiberglass unit

THE ULTIMATE IN PERFORMANCE

The goal of AMS is to provide the highest quality, best performing products available.
By utilizing research and development and rigorous testing programs AMS will never compromise the quality or performance of our products.

SHOP PARTS

NOT LEGAL FOR USE ON POLLUTION CONTROLLED MOTOR VEHICLES. THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE ON HIGHWAY OR STREET VEHICLES, OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES.

Learn More

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some AMS Performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website: http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. AMS Performance holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.

Check out with afirmFree
    Shipping

On all orders over $199.99 in the lower 48.*Freight items not included*