AMS 3.5L EcoBoost F150 & Raptor Turbine Housing Adaptor Kit
We are proud to offer the AMS 3.5L EcoBoost F150 Turbine Housing Adaptors! Our Engineers designed this product to let your EcoBoost turbos breathe. More flow equals more power.
$149.95
In Stock
-
California Residents: Prop 65 Warning
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 6 × 3 in |
CARB And / Or EPA Compliance Testing Not Completed
While we believe this product is either CARB EO exemption applicable, or complies with the EPA's Anti-Tampering Policy, we have not completed the required testing and administrative process at this time. This product is not available to purchase for emissions-controlled vehicles located within the state of California, or available to ship to California addresses, without a completed AMS Race Waiver form. International users outside of the United States should act in accordance with their local laws and regulations.
With 23 years of documented research and development in the forced induction field, AMS Performance has proven itself as the powerhouse in the automotive aftermarket. Our award winning performance systems are what all others are measured by.
Benefits
- Wider mouth lets turbos breathe
- Nearly 55% more internal cross-sectional area
- Largest turbine housing adaptor on the market
- Minimum ID 64mm (+20.8%)
- Maximum ID 76.5mm (+44.3%)
- Internal Cross Sectional Area 34.12cm2 (+54.8%)
- More flow = More power
- Lets the turbos spool faster
- New castings not machined OEM flanges
- Precision CNC machined surfaces
- 304 Stainless Steel construction
- Matches OEM gasket profile
- Designed to perform best with our AMS 3.5L F150 or Raptor downpipes
- Installs easily in between the turbine housing and downpipes
We are proud to offer the AMS 3.5L EcoBoost F150 Turbine Housing Adaptors! Our Engineers designed this product to let your EcoBoost turbos breathe. More flow equals more power. These are a clean sheet designed component not a reworked OEM piece. The smooth transitions help the hot exhaust gases to pass easily out of the turbo reducing back pressure which helps the turbos spool faster. These easily install in between the turbo and the downpipes so when you upgrade to the AMS F150 Downpipes you will want to upgrade to the AMS outlet flange adaptors at the same time.
- 2011-2020 3.5L EcoBoost F150
- 2017-2020 3.5L Raptor
- Hardware is not included but required to be replaced during installation
- W520514-S440 Ford – Catalytic Converter Nut
- W716667-S900 Ford – Catalytic Converter Stud
- BL3Z-9450-A Ford – Turbocharger Gasket
- Installation instructions
