Well we are making some good ground over here on Tim’s car. The motor is out and the deatschwerks injectors are installed. The stock turbos are getting swapped as I type with with the upgraded AMS units. The Intercoolers have been removed and replaced with the much larger AMS unit. The stock fuel tank is out and being updated with a very cool dual pump upgrade that installs just like factory. I doubt the dealer will be able to tell we put upgraded pumps in! The big plus is this is that instead of using industry standard walbro pumps we are using a unique pump that looks like stock, flow more fuel and does not have that dreaded walbro fuel pump whine at all.

Also Tim opted to do a little preventative maintenance on his GT-R so we removed his stock transmission and sent it off to Mr John Shepherd for some much needed upgrades. Lots of work going on over here at AMS

Here are some pictures of the progress:

Trans coming out

Removing the stock IC and installing the AMS unit:

Engine out and ready for upgraded AMS Turbo’s!

Stay tuned as more updates develop.

THE ULTIMATE IN PERFORMANCE

The goal of AMS is to provide the highest quality, best performing products available.
By utilizing research and development and rigorous testing programs AMS will never compromise the quality or performance of our products.

SHOP PARTS

NOT LEGAL FOR USE ON POLLUTION CONTROLLED MOTOR VEHICLES. THIS PRODUCT IS FOR RACING COMPETITION ONLY AND IS NOT LEGAL FOR USE ON HIGHWAY OR STREET VEHICLES, OR OTHER NON-RACING COMPETITION OFF-ROAD VEHICLES.

Learn More

This policy only applies to installers and/or users who are in the United States, customers who reside in other countries should act in accordance with their local laws and regulations.

Some AMS Performance upgrades may solely be used on vehicles in sanctioned competition which may never be used upon a public road or highway, unless permitted by specific regulatory exemptions (such as a CARB E.O.). For state specific details please visit the following website: http://www.semasan.com/emissions

It is the responsibility of the installer and/or user of the product to ensure that it is used in compliance with all applicable laws and regulations. If a product was purchased in error, do not install and/or use it. The purchaser must arrange to return the product(s) for a full refund.

All performance modifications and installations are at the customer’s own risk. AMS Performance holds no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products.

Check out with afirmFree
    Shipping

On all orders over $199.99 in the lower 48.*Freight items not included*